Framing posters: How to get the details right

Indramning af plakater: Sådan får du detaljerne med

On an old map, a place name might be right at the edge. In a botanical illustration, the plant's roots might be close to the bottom edge of the paper. And on an advertising poster, the lettering can be just as important a part of the image as the picture itself.

That's why framing is also about what you allow to be visible.

I like being able to get close to a print and discover the little details. The right frame can help: It should suit the paper, give the image space, and make it pleasant to look at.

You can easily frame a new poster yourself. Start with the dimensions, and then consider the matting, glass, and placement.

Start with the poster's dimensions

Measure the paper itself before you buy a frame. The size stated on the frame usually describes the image size it fits, not its external dimensions. However, always check the manufacturer's information, especially if the frame comes with matting.

If you have a 50 × 70 cm poster, you should generally choose a frame for a 50 × 70 cm print if it is to be framed without matting.

With matting, the frame must be larger than the poster. Here are three dimensions to keep in mind:

  • The paper's dimensions: The entire sheet, including any white border.

  • The mat opening: The section of the paper that will be visible.

  • The mat's external dimensions: The size that must fit inside the frame.

A 50 × 70 cm frame with matting is therefore not necessarily intended for a 50 × 70 cm poster. The opening can be significantly smaller.

At GamleStreger, some images have special dimensions because the proportions of the original must be preserved. Therefore, check the size of the specific product rather than choosing a frame by eye.

Keep an eye on what the frame hides

The inner edge of the frame usually covers a small part of the paper. The same applies to matting, which lies over the edges of the sheet.

On a poster with plenty of space around the image, this may not matter much. On a detailed historical map it can make the difference between being able to read a title, a scale, or the cartographer's name.

Therefore, place the frame or matting over the print before you mount it. Check all four sides.

If important text disappears, you should choose another solution. A framer can, for example, help with mounting that leaves the entire sheet visible. This is often better than trimming a historical image to make it fit.

What does matting do?

Matting is cardboard with a cut-out opening that sits around the image inside the frame. It creates a visible border and can give the eye a little distance between the image and the frame moulding.

It also has a practical function: With sufficient thickness, it helps keep the paper away from the glass.

Matting can be ideal for a botanical illustration where the plant stands alone on a light background. On a densely drawn city map, it can provide a little calm around the many streets and names. But it is not necessary for all images. An advertising poster can work perfectly well with a frame closer to the image.

If you want framing without matting, a framer can use spacers to create space between the print and the glass.

Choose acid-free, lignin-free matting cardboard and a suitable backing board if you want to take good care of the print. The Library of Congress highlights the materials around the paper as an important part of good framing.

What color should the frame be?

There is no single right frame for old posters. I would start with the colors in the image itself and then look at the wall where it will hang.

A black frame can unify an image with dark lettering and clear lines. Try it for a city map or a graphic advertising poster.

A wooden frame can complement warm paper tones and muted colors. However, light wood and dark wood give very different results.

A white frame can work for light images. Hold it up to the paper first: A completely white frame can make a cream-colored background look more yellow.

The same applies to the matting. Try both white and a warmer shade if the image has an old paper tone. It is easier to assess with a physical sample than on a screen.

Standard glass, acrylic, or anti-reflective glass?

The choice depends on several factors, including the poster's size and the light in the room.

Standard picture glass is a simple solution, but can cause noticeable reflections. Acrylic is lighter and less likely to shatter, but scratches more easily. It can be relevant for large frames.

For maps with small place names, I would especially check the reflections. If the window is reflected in the middle of the map, the details become harder to read.

Anti-reflective glass is available in different versions. Some matte types can make fine details less sharp, especially with space between the glass and the image. Ask to see a sample with text behind it.

Anti-reflection and UV protection are different properties. Check the product specifications rather than assuming terms like “art glass” or “museum glass”.

How to handle a poster from a tube

Prepare the workspace before you take the poster out. A clean, dry table with room for the entire sheet makes the job much easier.

  1. Wash and dry your hands, and remove anything that could scratch or stain the paper.

  2. Open the packaging carefully. Avoid bringing a knife toward the print.

  3. Support the sheet while you carefully unroll it. It is best to hold the edges.

  4. Let the paper relax on a clean, flat surface. Do not force it flat with sharp bends.

  5. If light pressure is needed, use clean, smooth protective paper and a smooth, clean board. Do not place books or other objects directly on the image.

Do not use an iron, steam, or water to flatten the poster. If the paper continues to curl severely, it is better to ask a framer than to press harder.

The advice here applies to new prints. An old, fragile original sheet requires a different assessment.

Avoid tape directly on the poster

It is tempting to put a few pieces of regular tape on the back of the print so that it stays in place. But the adhesive can leave marks and be difficult to remove.

Use a suitable mounting method, such as correctly sized photo or mounting corners, when the image's edges allow it. For large sheets or mounting without a visible edge, a framer can help.

The paper should not be stretched tightly all around either. It must be allowed to move slightly when the humidity changes.

Clean the glass while it is separate from the poster, and let it dry completely before assembly. Check for dust and fingerprints before closing the frame.

Placement is part of the framing

A good frame cannot counteract the effects of direct sunlight, moisture, and heat.

Therefore, avoid a place where strong sunlight hits the image for extended periods, directly above a radiator, or close to steam from cooking. A damp bathroom is also not an ideal place for a paper print.

UV-filtering glass can reduce some of the light exposure, but does not protect against all fading. Visible light can also affect paper and colors.

When you hang the frame, the bracket and fastening should suit both the wall's material and the frame's total weight. A large frame with glass weighs significantly more than the poster alone.

Let the image decide

Before you decide, place the print together with the frame and matting you are considering. Look at it both up close and from the distance you would normally view it from.

Can you read the place names? Is the entire plant's root included? Does the advertising poster's lettering have space?

Those are the questions I would start with. When the framing works, you will want to stand and examine the image.

You can find images to use as a starting point among our historical city maps, botanical prints and old advertising posters.

Frequently Asked Questions

Which frame fits a 50 × 70 cm poster?

Without a mat, you will normally need a frame designed for 50 × 70 cm. With a mat, the frame must be larger. Check both the frame's image dimensions and the mat's opening before purchasing.

Should a poster have a mat?

No, not necessarily. A mat can create space around the image and keep the paper away from the glass. If you prefer a look without a mat, spacers can create the necessary distance.

Can I frame a custom-sized poster?

Yes. You can choose a custom-made frame or check if the poster fits in a larger standard frame with a custom mat. Make sure the opening does not hide important parts of the image.

Does UV-protective glass protect a poster from fading?

UV-filtering glass reduces UV exposure but does not prevent all fading. Visible light also affects paper and colors. Therefore, still keep the print out of direct sunlight.